sync cord canon

Yong Nuo new 2.4GHz wireless remote controls are the advanced design of CTR-301 and YN-128. In other words, you can easily achieve flash trigger as well as wireless shutter function by using a pair of RF-602 transmitter/receiver Wireless flash trigger: As a flash trigger, RF-602 trigger both flash speedlite and studio flashes. The flash sync speed is up to 1/250s Cable shutter release: With the wired cable provided, RF-602 operates as cable shutter release Wireless shutter release: As the wireless shutter release, its working range is up to 100 meters. Full-way press the release button starts the continuous shooting or long exposure Features and specifications: 4GHz band-16 selectable operating frequencies for eliminating interference The RF-602 transmitter/receiver pair may be used to trigger all studio flash units employing a standard phone jack or mini phone jack sync input. A 3.5mm mini phone jack and 6.35mm full size sync jack adapter are provided Flash synchronization speed: 1/250s Transmitter distance: 100m Release: half-way press, full-way press Time of shooting: up to 20, 000 times (CR2 lithium battery) Receiver stand-by time: up to 45 hours (AAA battery). Compatible with Canon 1D/5D/7D/10D/20D/30D/40D/50D

CHECK PRICE NOW!
Read Full Review >>

The TTL Off-Camera Flash Remote Cord provides full TTL control for Canon Speedlites when used off-camera with Canon cameras which have the TTL hot flash shoe. It permits easy use of flash when the camera is mounted upon a bracket. Will work on the with all speedlites including the 580EX II & 430EX II.

CHECK PRICE NOW!
Read Full Review >>

This TTL Off-Camera Shoe Cord mounts on CANON camera’s hot shoe. The hot shoe of the TTL cord mounts onto the camera flash bracket via the threaded insert and an external flash gun mounts on the TTL’s hot shoe. The TTL cord maintains all of the on-camera functions (including E-TTL II) for one Canon Speedlite used off-camera at distance of up to 4.6ft (140cm).
Compatible with Canon OC-E3
Note: Camera or flash not included.

CHECK PRICE NOW!
Read Full Review >>

Using an innovative pin configuration the Multi-fit TTL cord can be used with Nikon, Fuji and Canon cameras when used with manufacturer’s flashguns. The cord is 10m (32′) Ideal for using a secondary flashgun connected to your camera as a master unit to control your Remote units at a greater distance with a screw thread built in it can be mounted on to a light stand to hold your flashgun. In addition you can fire two flashguns on the same cord in manual mode.

CHECK PRICE NOW!
Read Full Review >>

* Substitute of Canon OC-E3 remote cord
* Compatible Cameras: All Canon EOS models
* Compatible Flash Model: 580EX, 580EX II

Length: Approx. 2 ft (extendable to 5 ft); Weight: 167g;

CHECK PRICE NOW!
Read Full Review >>

Sea & Sea 6-Pin Sync Cord For GN & Canon ETTL Strobes This Sea & Sea 6 pin sync cord is for the Sea & Sea guide number controller. The sync cord is also used with the Sea & Sea housing for the Canon Digital Rebel with the YS-55 Strobe or the SLH-C220 strobe housing for a TTL connection.

CHECK PRICE NOW!
Read Full Review >>